前言介紹
- 這款 WordPress 外掛「GedShow」是 2019-01-07 上架。
- 目前有 200 個安裝啟用數。
- 上一次更新是 2024-03-30，距離現在已有 400 天。超過一年沒更新，安裝要確認版本是否可用。以及後續維護問題！
- 外掛最低要求 WordPress 4.9 以上版本才可以安裝。
- 外掛要求網站主機運作至少需要 PHP 版本 5.6 以上。
- 有 8 人給過評分。
- 還沒有人在論壇上發問，可能目前使用數不多，還沒有什麼大問題。
外掛協作開發者
外掛標籤
family | GEDCOM | ancestors | genealogy | family history |
內容簡介
GedShow 是一個簡單的 WordPress 外掛程式，允許將 GEDCOM 文件上傳到 WordPress 網站。安裝插件後，在網站管理員選單面板中會出現一個名為 Gedshow 的新選單項目。點擊此選單選項會顯示文件上傳對話框頁面，讓您瀏覽您的電腦查找 GEDCOM 文件，然後上傳。一旦 GEDCOM 文件被上傳，一些數據就會從中提取並加載到 WordPress 數據庫中。可使用短碼在頁面上顯示已上傳信息。
第一個短碼是 [gedshow living=”yes”] 或 [gedshow living=”no”]，短碼應該用小寫字母括在方括號內。此短碼會顯示數據庫中所有姓氏的列表，並顯示擁有該姓氏的記錄數（括號內）。這些姓氏會顯示在按鈕上，單擊按鈕會顯示單擊的姓氏所有個人的名和姓，隱藏所有姓氏的所有記錄，再次顯示名稱的按鈕。單擊此按鈕會顯示該人的個人記錄。目前顯示的是職業、出生、洗禮、死亡、埋葬、居住和職業日期和地點。如果個人有子女，則會顯示「顯示樹」按鈕，單擊此按鈕會顯示以下婚姻詳細信息的家庭的圖形樹。配偶和子女的名稱是鏈接，單擊任何一個名稱都會將顯示更改為該新個人的詳細信息。
第二個短碼是 [surname sn=”smith” living=”yes”] 或 [surname sn=”smith” living=”no”]。用雙引號括起來替換 smith 爲所需的姓。此短碼類似上述短碼。
第三個短碼是 [gs_individual id=”I1″ name=”Y” facts=”Y”]。此短碼可以放置在任何頁面或文章中，顯示人物姓名、出生、婚姻和死亡日期，然後顯示任何個人級別的筆記。然後可以按通常的方式添加其他信息和照片。人物的參考號碼可以在其正常的 Gedshow 頁面的標題中通過懸停其名稱找到。詳細信息請咨詢演示網站。
第四個短碼是 [gs_tree id=”I1″]。此短碼可在選定的個人身份證明書上顯示一個 3 代祖先樹。詳情請參見上述第三個短碼。請注意，此短碼不檢查是否顯示生存個人。
前兩個短碼現在都可以使用住宅 yes / no 限定詞。因此，[gedshow living=”yes”] 或 [surname sn=”smith” living=”yes”]。如果沒有添加住宅限定詞，則假定為住宅 = no。若要使此新短碼起作用，您必須重新導入您的 GEDCOM 文件，因為存在數據庫更改。演示網站上有一個新頁面關於使用此新住宅限定。
當首次顯示名字和姓氏時，在按鈕或個人記錄標題中顯示個人的性別，使用 Unicode 符號，♂ 代表男性，♀ 代表女性。
「即將到來的生日」小部件可在小工具面板中作爲 Gedshow 生日顯示。它可以顯示在任何小部件區域（最好是 250 像素寬或更寬），標題和要顯示的出生日期數可以在小部件對話框中選擇（默認值為 10）。僅顯示天和月份，因此不會壓制生存人員的顯示。
「頂部姓氏」小工具可在小工具面板中作爲 Gedshow 姓氏顯示。此小部件顯示一個可配置的數量（默認值為 10）的高姓氏數。
原文外掛簡介
GedShow is a simple WordPress plugin that allows the uploading of a gedcom file to a WordPress website. Once the plugin is installed there is a new menu item in the Admin menu panel on the website entitled Gedshow. On clicking this menu option a file upload dialog page is displayed allowing you to browse your computer for your gedcom file and then upload it. Once the gedcom file has been uploaded some of the data is extracted from it and loaded into the WordPress database. The uploaded information can then be displayed on a page using a shortcode.
The first shortcode is [gedshow living=”yes”] or [gedshow living=”no”], as usual the shortcode should be typed in lowercase and surrounded by square brackets. This displays a list of all the surnames in the database with a count of the number of records who have that surname in brackets next to the surname. The surname is displayed on a button, clicking on this button then shows the first and surname of all those individuals of the surname clicked and hides the all surnames records, again the names are displayed on a button. Clicking on this new button shows the individual record of that person. Currently occupations, birth, baptism, death, burial, residence and occupation dates and places are shown. If the individual had children a ‘show tree’ button is displayed, clicking this button shows a graphical tree of the family below the marriage details. The names of the spouse and children of the individual are links and clicking on any of these changes the display of fact to that new individuals details.
The second shortcode is [surname sn=”smith” living=”yes”] or [surname sn=”smith” living=”no”]. Replace smith with the surname of your choice within double quotes (ensuring that the surname exists in your gedcom). This shortcode then displays the data as above.
The third shortcode is [gs_individual id=”I1″ name=”Y” facts=”Y”] This shortcode can be placed on any page or post and will display the persons name (if Y is in the shortcode) followed by their Birth, Marriage and Death details and then any person level notes. Additional information and photos can then be added in the usual way. The reference number can be found for the person in the header of their normal Gedshow page by hovering over their name. More details on the demo site.
The fourth shortcode is [gs_tree id=”I1″] This displays a 3 generation Ancestor tree for a chosen individual. The id number is found in the same was as shortcode 3 above. The shortcode can be used anywhere on a page or post. PLEASE NOTE THAT THIS SHORTCODE DOES NOT CHECK FOR LIVING INDIVIDUALS BEING DISPLAYED.
The first two shortcodes can now have living yes / no qualifier. So [gedshow living=”yes”] or [surname sn=”smith” living=”yes”]. If you do not add the living qualifier living=no is assumed.
For these new shortcodes to work you MUST re-import your gedcom file as there are database changes. There is a new page on the demo website on using this new living qualifier.
The fifth shortcode is [gs_allnames] This is for a page specifically for search engines it lists all the individuals in the database with their dates of birth and death (if known) in a simple table. It does not include living individuals.
When first and surnames are shown on either the button or in the heading for individual records the sex of the individual is shown after the surname using the unicode symbols, ♂ for male and ♀ for female.
The ‘Upcoming Birthdays’ widget is available in the Widgets pane as Gedshow Birthdays. It can be displayed in any widget area (ideally around 250px wide or wider) the title and number of birthdays to show is selectable in the widget dialog (default 10). Only the day and month are shown so display of Living people is not repressed.
The ‘Top Surnames’ widget is available in the Widgets pane as Gedshow Surnames. This widget shows a configurable number (default 10) of the highest number of surnames in the database.
The ‘Anniversaries’ widget is available in the Widgets pane as Gedshow Anniversaries. This widget shows a configurable number (default 5) of the upcoming wedding anniversaries in the database.
The ‘In Memoriam’ widget is available in the Widgets pane as Gedshow In Memoriam. This widget shows a configurable number (default 10) of the upcoming deaths in the database.
Current limitations:
Only one gedcom can be uploaded, the previous one will be deleted if a new one is uploaded.
UTF-16 gedcom files, native to Family Historian V6, are not supported. Export as utf-8 format gedcom for use in this plugin.
Large gedcom files with >25000 individuals are unlikely to load due to webserver timeouts (this may be a smaller number on free / shared webhosts.
Future enhancements:
Suggestions for added functionality welcome
Demo site – Full shortcode
Demo site – Surname shortcode
Demo site – Person story shortcode
Users group on Facebook
Any comments / feedback to [email protected]
各版本下載點
- 方法一：點下方版本號的連結下載 ZIP 檔案後，登入網站後台左側選單「外掛」的「安裝外掛」，然後選擇上方的「上傳外掛」，把下載回去的 ZIP 外掛打包檔案上傳上去安裝與啟用。
- 方法二：透過「安裝外掛」的畫面右方搜尋功能，搜尋外掛名稱「GedShow」來進行安裝。
（建議使用方法二，確保安裝的版本符合當前運作的 WordPress 環境。
延伸相關外掛（你可能也想知道）
Rootspersona 》, 自版本 3.7.0，Rootspersona 需要 PHP5.6 或更高版本。, 詳細的更新內容可在 Changelog 中查看！, , Rootspersona 會使用從一個或多個 GEDCOM 檔案匯入的資...。
WP Genealogy – Your Family History Website 》輕鬆在你的 WordPress 網站上建立家族歷史網站。, 這個外掛適用於所有想建立家族歷史網站的人。輕鬆管理和分享家族資料。, 感謝您查看我們的外掛。希望您喜歡...。