[WordPress] 外掛分享: Integration of CiviCRM’s Form Processor with Caldera Forms

前言介紹

  • 這款 WordPress 外掛「Integration of CiviCRM's Form Processor with Caldera Forms」是 2020-12-22 上架。
  • 目前有 200 個安裝啟用數。
  • 上一次更新是 2023-09-19,距離現在已有 593 天。超過一年沒更新,安裝要確認版本是否可用。以及後續維護問題!
  • 外掛最低要求 WordPress 5.2 以上版本才可以安裝。
  • 外掛要求網站主機運作至少需要 PHP 版本 7.2 以上。
  • 尚未有人給過這款外掛評分。
  • 還沒有人在論壇上發問,可能目前使用數不多,還沒有什麼大問題。

外掛協作開發者

jaapjansma |

外掛標籤

form | forms | civicrm | contact form |

內容簡介

此外掛可以讓 Calera 表單提交至 CiviCRM 表單處理器。
CiviCRM 不一定要和 WordPress 安裝在同一個伺服器上。
如未安裝,請安裝 [CiviCRM McRestFace 連接器外掛(https://github.com/CiviMRF/wpcmrf)] 來連線至遠端的 CiviCRM。

當 CiviCRM 安裝於遠端伺服器時的設定

當前端 WordPress 網站與 CiviCRM 不在同一台主機時,請使用以下設定:

在前端網站中安裝並啟用以下外掛:

Calera Forms - WordPress 外掛
Caldera Forms 整合和 CiviCRM 表單處理器 - 這個 WordPress 外掛
CiviMcRestFace 連接器外掛 - WordPress 外掛

在前端網站中設定 CMRF 連線以連接前端和後端伺服器
在後端伺服器中,安裝並啟用以下外掛:

CiviCRM 表單處理器 - CiviCRM 外掛

在後端伺服器中創建 CiviCRM 表單處理器
在前端伺服器中創建 Caldera 表單
在處理器選項中,點選 Add Processor
對於每個你創建的表單處理器,你應該會看到一個名稱與表單處理器相同、前面有 ‘CiviCRM 表單處理器’ 的處理器

當 CiviCRM 安裝於本機時的設定

當前端 WordPress 網站與 CiviCRM 安裝於相同的 WordPress 上時,請使用以下設定:

安裝並啟用以下外掛:

Calera Forms - WordPress 外掛
CiviCRM 表單處理器 - CiviCRM 外掛
Calera Forms 整合和 CiviCRM 表單處理器 - 這個 WordPress 外掛

創建 CiviCRM 表單處理器
創建 Caldera 表單
在處理器選項中,點選 Add Processor
對於每個你創建的表單處理器,你應該會看到一個名稱與表單處理器相同、前面有 ‘CiviCRM 表單處理器’ 的處理器

注意:如果你未建立任何表單處理器,將不會顯示任何 CiviCRM Caldera 處理器!

贊助

CiviCooP
Civiservice.de GmbH
Bundesverband Soziokultur e.V.
Article 19

原文外掛簡介

This plugin makes it possible to submit caldera forms to CiviCRM’s Form Processor.
CiviCRM does not necessarily be installed in the same installation.
If it isn’t use the [CiviCRM McRestFace Connector plugin(https://github.com/CiviMRF/wpcmrf) to connect to a remote CiviCRM.
Configuration when CiviCRM is on a remote server
Use this when the front-end WordPress site and CiviCRM are on different servers:

On the front-end site, install and activate:

Caldera Forms – WP plugin
Caldera Forms integration with CiviCRM Form Processor – this WP plugin
CiviMcRestFace Connection Plugin – WP plugin

On the front-end site, configure a CMRF connection to connect the front-end to the back-end
On the back-end server, install and enable:

CiviCRM Form Processor – CiviCRM extension

On the back-end server, create a CiviCRM Form Processor
On the front-end server, create a Caldera Form
On the Procssors tab, click Add Processor
For each Form Processor you created, you should see a processor named the same as the Form Processor prefixed by ‘CiviCRM Form Processor’ and suffixed by ‘at ‘

Configuration when CiviCRM is installed locally
Use this when the frontend WordPress site and CiviCRM are in the same wordpress installation:

Install and activate:

Caldera Forms – WP plugin
CiviCRM Form Processor – CiviCRM extension
Caldera Forms integration with CiviCRM Form Processor – this WP plugin

Create a CiviCRM Form Processor
Create a Caldera Form
On the Processors tab, click Add Processor
For each Form Processor you created, you should see a processor named the same as the Form Processor prefixed by ‘CiviCRM Form Processor’

NB – If you have not created any Form Processors, no CiviCRM Caldera Processors will be listed!
Funded by

CiviCooP
Civiservice.de GmbH
Bundesverband Soziokultur e.V.
Article 19

各版本下載點

  • 方法一:點下方版本號的連結下載 ZIP 檔案後,登入網站後台左側選單「外掛」的「安裝外掛」,然後選擇上方的「上傳外掛」,把下載回去的 ZIP 外掛打包檔案上傳上去安裝與啟用。
  • 方法二:透過「安裝外掛」的畫面右方搜尋功能,搜尋外掛名稱「Integration of CiviCRM's Form Processor with Caldera Forms」來進行安裝。

(建議使用方法二,確保安裝的版本符合當前運作的 WordPress 環境。


1.0.0 | 1.0.1 | trunk |

延伸相關外掛(你可能也想知道)

文章
Filter
Apply Filters
Mastodon