前言介紹
- 這款 WordPress 外掛「ActivityPub」是 2018-09-23 上架。
- 目前有 6000 個安裝啟用數。
- 上一次更新是 2025-04-24，距離現在已有 10 天。
- 外掛最低要求 WordPress 6.4 以上版本才可以安裝。
- 外掛要求網站主機運作至少需要 PHP 版本 7.2 以上。
- 有 33 人給過評分。
- 論壇上目前有 33 個提問，問題解答率 94% ，不低，算是個很有心解決問題的開發者團隊了！
外掛協作開發者
akirk | jeherve | obenland | mattwiebe | nuriapena | pfefferle | automattic | mediaformat | andremenrath | cavalierlife |
外掛標籤
ostatus | fediverse | activitypub | activitystream |
內容簡介
這是測試版軟體，請參閱常見問題集以查看目前功能集或仍在計劃中的功能。
此外掛實現了 ActivityPub 協議，讓您的讀者能夠在 Mastodon 及其他支援 ActivityPub 的聯合平台上關注您的部落格文章。
此外掛支援以下聯合平台:
Mastodon
Pleroma
Friendica
HubZilla
Pixelfed
SocialHome
Misskey
原文外掛簡介
Enter the fediverse with ActivityPub, broadcasting your blog to a wider audience! Attract followers, deliver updates, and receive comments from a diverse user base of ActivityPub-compliant platforms.
With the ActivityPub plugin installed, your WordPress blog itself function as a federated profile, along with profiles for each author. For instance, if your website is example.com, then the blog-wide profile can be found at @[email protected], and authors like Jane and Bob would have their individual profiles at @[email protected] and @[email protected], respectively.
An example: I give you my Mastodon profile name: @pfefferle. You search, see my profile, and hit follow. Now, any post I make appears in your Home feed. Similarly, with the ActivityPub plugin, you can find and follow Jane’s profile at @[email protected].
Once you follow Jane’s @[email protected] profile, any blog post she crafts on example.com will land in your Home feed. Simultaneously, by following the blog-wide profile @[email protected], you’ll receive updates from all authors.
Note: If no one follows your author or blog instance, your posts remain unseen. The simplest method to verify the plugin’s operation is by following your profile. If you possess a Mastodon profile, initiate by following your new one.
The plugin works with the following tested federated platforms, but there may be more that it works with as well:
Mastodon
Pleroma/Akkoma
friendica
Hubzilla
Pixelfed
Socialhome
Misskey
Some things to note:
The blog-wide profile is only compatible with sites with rewrite rules enabled. If your site does not have rewrite rules enabled, the author-specific profiles may still work.
Many single-author blogs have chosen to turn off or redirect their author profile pages, usually via an SEO plugin like Yoast or Rank Math. This is usually done to avoid duplicate content with your blog’s home page. If your author page has been deactivated in this way, then ActivityPub author profiles won’t work for you. Instead, you can turn your author profile page back on, and then use the option in your SEO plugin to noindex the author page. This will still resolve duplicate content issues with search engines and will enable ActivityPub author profiles to work.
Once ActivityPub is installed, only new posts going forward will be available in the fediverse. Likewise, even if you’ve been using ActivityPub for a while, anyone who follows your site will only see new posts you publish from that moment on. They will never see previously-published posts in their Home feed. This process is very similar to subscribing to a newsletter. If you subscribe to a newsletter, you will only receive future emails, but not the old archived ones. With ActivityPub, if someone follows your site, they will only receive new blog posts you publish from then on.
So what’s the process?
Install the ActivityPub plugin.
Go to the plugin’s settings page and adjust the settings to your liking. Click the Save button when ready.
Make sure your blog’s author profile page is active if you are using author profiles.
Go to Mastodon or any other federated platform, and search for your profile, and follow it. Your new profile will be in the form of either @[email protected] or @[email protected], so that is what you’ll search for.
On your blog, publish a new post.
From Mastodon, check to see if the new post appears in your Home feed.
Note: It may take up to 15 minutes or so for the new post to show up in your federated feed. This is because the messages are sent to the federated platforms using a delayed cron. This avoids breaking the publishing process for those cases where users might have lots of followers. So please don’t assume that just because you didn’t see it show up right away that something is broken. Give it some time. In most cases, it will show up within a few minutes, and you’ll know everything is working as expected.
各版本下載點
- 方法一：點下方版本號的連結下載 ZIP 檔案後，登入網站後台左側選單「外掛」的「安裝外掛」，然後選擇上方的「上傳外掛」，把下載回去的 ZIP 外掛打包檔案上傳上去安裝與啟用。
- 方法二：透過「安裝外掛」的畫面右方搜尋功能，搜尋外掛名稱「ActivityPub」來進行安裝。
（建議使用方法二，確保安裝的版本符合當前運作的 WordPress 環境。
0.0.1 | 0.0.2 | 0.1.0 | 0.1.1 | 0.2.0 | 0.2.1 | 0.3.0 | 0.3.1 | 0.3.2 | 0.4.0 | 0.4.1 | 0.4.2 | 0.4.3 | 0.4.4 | 0.5.0 | 0.5.1 | 0.6.0 | 0.7.0 | 0.7.1 | 0.7.2 | 0.7.3 | 0.7.4 | 0.8.0 | 0.8.1 | 0.8.2 | 0.8.3 | 0.9.0 | 0.9.1 | 1.0.0 | 1.0.1 | 1.0.2 | 1.0.3 | 1.0.4 | 1.0.5 | 1.0.6 | 1.0.7 | 1.0.8 | 1.0.9 | 1.1.0 | 1.2.0 | 1.3.0 | 2.0.0 | 2.0.1 | 2.1.0 | 2.1.1 | 2.2.0 | 2.3.0 | 2.3.1 | 2.4.0 | 2.5.0 | 2.6.0 | 2.6.1 | 3.0.0 | 3.1.0 | 3.2.0 | 3.2.1 | 3.2.2 | 3.2.3 | 3.2.4 | 3.2.5 | 3.3.0 | 3.3.1 | 3.3.2 | 3.3.3 | 4.0.0 | 4.0.1 | 4.0.2 | 4.1.0 | 4.1.1 | 4.2.0 | 4.2.1 | 4.3.0 | 4.4.0 | 4.5.0 | 4.5.1 | 4.6.0 | 4.7.0 | 4.7.1 | 4.7.2 | 4.7.3 | 5.0.0 | 5.1.0 | 5.2.0 | 5.3.0 | 5.3.1 | 5.3.2 | 5.4.0 | 5.4.1 | 5.5.0 | 5.6.0 | 5.6.1 | 5.7.0 | 5.8.0 | trunk | 0.10.0 | 0.10.1 | 0.11.0 | 0.11.1 | 0.11.2 | 0.12.0 | 0.13.0 | 0.13.1 | 0.13.2 | 0.13.3 | 0.13.4 | 0.14.0 | 0.14.1 | 0.14.2 | 0.14.3 | 0.15.0 | 0.16.0 | 0.16.1 | 0.16.2 | 0.16.3 | 0.16.4 | 0.16.5 | 0.17.0 | 1.0.10 |
延伸相關外掛（你可能也想知道）
暫無相關外掛推薦。